-ar Accesorios SparkFun

Resultados: 372
Seleccionar Imagen N.° de pieza
 Fabricante:
Descripción Hoja de datos Disponibilidad Precio: (USD) Filtre los resultados en la tabla por precio unitario en función de su cantidad.
Cantidad RoHS Modelo ECAD Producto
Tipo
SparkFun Accesorios SparkFun USB is being implemented as a power connection standard more and more these days but you don't always have a computer on hand so how are you going to power all of your sweet USB devices? How about a high quality switching 'wall wart'? This AC to DC 32En existencias
2En pedido
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun This is a 10-pin socket with 2mm pitch that mates with the popular XBee radio from Digi. This is the SMD version that we are currently using on our shields and breakout boards.Note:** **This item is sold as each not in pairs. 299En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Looking to add MIDI to your project? This is a female 5-pin right-angle DIN 5/180? connector which will interface with most standard MIDI cables. The pins are spaced by just about 0.1" making these connectors easy to prototype with. The contacts 66En existencias
Min.: 1
Mult.: 1
Connectors
SparkFun Accesorios SparkFun LilyPad Slide Switch 20En existencias
Min.: 1
Mult.: 1

Switches
SparkFun Accesorios SparkFun This is a simple SPDT slide switch - great for use as an ON/OFF button or just as a general control switch. The pins are spaced by 0.1" however they are incredibly thin making breadboard use not recommended. The switch is rated for 0.3A at 50VDC. 393En existencias
427En pedido
Min.: 1
Mult.: 1

Switches
SparkFun Accesorios SparkFun Through-hole RJ11 socket with PCB mounting posts. 6-pin connection - housing accepts common telephone connectors/wiring.If you need a board for this connector be sure to check out our SparkFun RJ11 Breakout. Two boards are included so be sure to buy 98En existencias
Min.: 1
Mult.: 1
Connectors
SparkFun Accesorios SparkFun This is a 3-pin through-hole PH series JST connector. The pins are spaced by 2mm.We really like the solid locking feeling and high current rating on these small connectors. This connector mates with our 3-pin jumper wire and may be useful for inter 17En existencias
Min.: 1
Mult.: 1
Connectors
SparkFun Accesorios SparkFun Audio Cable TRRS - 1ft 43En existencias
Min.: 1
Mult.: 1

Cables 1 Feet Long, White Color
SparkFun Accesorios SparkFun This is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this cable are configured to operate at 3.3V specifically with a Raspberry Pi with each serial pin broken apart. Thanks to its se 50En existencias
Min.: 1
Mult.: 1
Cables
SparkFun Accesorios SparkFun This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough small panel-mount latching switch with an illuminated red LED ring. It is a SPDT with 16mm threading and 1mm pitch. This button is pe 2En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun These are your standard issue USB 2.0 type A to micro USB 5-pin... but wait what's this? These cables have minor yet genius modifications that allow both ends to be plugged into their ports regardless of their orientation. No longer will you fight
Hoja de datos
80En existencias
Min.: 1
Mult.: 1

Cables USB A to Micro-B Cable
SparkFun Accesorios SparkFun You'll have no need for a screwdriver with this terminal! This is a 4-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.19" spacing. Please note that the pins are thick enough (1.20mm
Hoja de datos
9En existencias
Min.: 1
Mult.: 1

Connectors Latch Terminal - 5mm Pitch (4-pin)
SparkFun Accesorios SparkFun Soldering Iron Stand 5En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Sometimes when you have too many choices it's hard to make a good decision. In fact there are times when you just want a bag of LEDs just one of each that's all you want. Well too bad you are getting two of each! The LED Rainbow Pack contains tw 10En existencias
Min.: 1
Mult.: 1
Optoelectronics LED
SparkFun Accesorios SparkFun This is a simple LED-illuminated tactile button with a clear cap. It's just like a basic tactile button but it lights up white! So now you can get visual feedback or light up your project. These have a 12mm body and are rated for 50mA. They don't e
Hoja de datos
3En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun These stackable headers are made to work with the SparkFun ESP32 Thing Plus to connect to shield with a Feather footprint. This set includes one 12-pin and one 16-pin header; the pins are spaced by 0.1".Each set of headers allows you to stack Feather
Hoja de datos
32En existencias
Min.: 1
Mult.: 1

Connectors Feather Stackable Header Kit
SparkFun Accesorios SparkFun For a long time we've had small 7-segment displays and *huge *7-segment displays but now we finally have something in between. These 20mm 4-digit 7-segment displays are big enough to see from a distance but not so big that you'd have trouble finding
Hoja de datos
11En existencias
Min.: 1
Mult.: 1

Displays 7-Segment Display
SparkFun Accesorios SparkFun For a long time we've had small 7-segment displays and *huge *7-segment displays but now we finally have something in between. These 20mm 4-digit 7-segment displays are big enough to see from a distance but not so big that you'd have trouble finding
Hoja de datos
167En existencias
Min.: 1
Mult.: 1

Displays 7-Segment Display
SparkFun Accesorios SparkFun Jumper - 2 Pin 538En existencias
350En pedido
Min.: 1
Mult.: 1

Connectors Headers & Wire Housings
SparkFun Accesorios SparkFun These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don't always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board
Hoja de datos
26En existencias
Más información disponible
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun USB Mini-B Cable 6' Mini-B Cable 6'
Hoja de datos
7En existencias
Min.: 1
Mult.: 1

Cables
SparkFun Accesorios SparkFun Sometimes you want a small input and a single button just won't cut it. A 5-way tactile switch allows for a joystick-like interface in a very small package. These are surface mount but easily soldered. 16En existencias
Min.: 1
Mult.: 1
Switches
SparkFun Accesorios SparkFun Transistor NPN (2N3904) 1,212En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun Here is a six pin vertical 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not the standard JST type connectors we use on most of our boards but are actually the much smaller JST-SH type. 22En existencias
Min.: 1
Mult.: 1
Connectors
SparkFun Accesorios SparkFun These are your standard issue USB 2.0 type A to micro USB 5-pin... but wait what's this? These cables have minor yet genius modifications that allow both ends to be plugged into their ports regardless of their orientation. No longer will you fight
Hoja de datos
20En existencias
Min.: 1
Mult.: 1

Cables USB A to Micro-B Cable